Rigid pipework Vs flexible hydraulic hoses

N.B.

This information is provided for general guidance only and is not a substitute for the manufacturer’s instructions, a site-specific risk assessment, applicable UK requirements or advice from a competent hydraulic professional. Hydraulic systems can contain high pressure and stored energy and may cause serious injury or death if incorrectly selected, assembled, installed, inspected or maintained. Never work on a pressurised system. Isolate, lock out and depressurise equipment before work, and use correctly specified, compatible components and approved assembly and testing procedures. If in doubt, stop work and seek competent professional advice. To the fullest extent permitted by law, Ardel OEM Limited accepts no responsibility for reliance on this information, subject to any liability that cannot lawfully be excluded or limited.

Rigid steel pipework and flexible hydraulic hoses play distinct, complementary roles: rigid lines suit fixed layouts, high pressures and temperatures, and precision control, while hoses suit moving or vibrating components and tight, complex routes.

Core pros and cons 

Rigid pipework (steel tube/pipe) 

Pros

  • Durability and strength: Handles high pressures and temperatures with little deformation, making it ideal for permanent, heavily loaded runs.
  • Minimal pressure expansion: Low volumetric expansion improves accuracy and response in precision systems.
  • Long service life: In static installations, robust construction and wear resistance generally allow rigid lines to outlast hoses.
  • Heat dissipation: Metal conducts heat effectively, helping cool hydraulic fluid in fixed installations.
  • Stable flow path: Uniform internal dimensions provide predictable pressure drop and flow over long, straight runs.

Cons

  • Limited flexibility: Cannot absorb relative component movement and requires precise bending and layout.
  • Complex installation: Requires skilled labour, tube-bending tools, and careful alignment; misalignment can cause leaks or fatigue.
  • Vibration transfer: Transmits pump pulsations and mechanical vibration, which may loosen fittings or fatigue supports unless isolated.
  • Thermal movement: Long rigid runs may require expansion joints to prevent temperature changes from stressing connections.
  • Impact vulnerability: Unless protected, exposed rigid lines can dent or crack from impacts or ground movement.

Flexible hydraulic hoses 

Pros

  • Movement accommodation: Essential where actuators, booms, or tools move relative to the frame, such as excavator arms.
  • Vibration and shock isolation: Absorbs pump pulsations and machine vibration, helping protect valves, sensors, and mounts.
  • Flexible routing: Bends around obstacles and through tight spaces, simplifying complex layouts.
  • Fast installation and replacement: Pre-made assemblies speed installation, reduce downtime, and are easy to replace in the field.
  • Thermal movement tolerance: Accommodates some expansion and contraction without overloading fittings.

Cons

  • Greater expansion: Hoses swell more than metal under pressure, which can slightly reduce positional accuracy and response in precision circuits.
  • Shorter dynamic-service life: Flexing, abrasion, pressure impulses, ozone, and UV exposure usually require more frequent replacement than rigid lines.
  • Pressure and temperature limits: Although high-pressure hoses are available, rigid metal generally withstands more extreme, sustained conditions.
  • Careful routing required: Hoses must meet minimum bend-radius requirements, avoid twisting, and prevent end loading; poor routing causes premature failure.
  • Inspection burden: Requires regular condition and age checks, plus planned replacement, especially in harsh environments.

Application examples 

Fixed plant: hydraulic press

 Typical configuration: Use rigid steel tube for main supply, return, and manifold lines, adding short hoses only for isolation or easier servicing.

Why rigid dominates

Precision and stability: Hydraulic presses need repeatable ram position and force control; low expansion in rigid lines helps preserve accuracy.

Sustained pressure and heat: Rigid lines are better suited to continuous high-pressure duty and heat generated by repeated cycles.

Long life and low maintenance: With little movement in a fixed layout, rigid lines reduce replacement frequency and long-term leakage risk.

Where hoses still help

Vibration isolation: Short hoses between the pump or manifold and frame can damp pulsations and protect instruments.

Service loops: Hoses at cylinder ports or quick-disconnects make cylinder or tool changes easier without rebending tube.

Practical layout pattern

Run rigid tube from the pump through the accumulator and directional valve bank to the cylinder ports.

Fit a short, correctly sized hose at the pump discharge or valve block to isolate vibration.

Use hoses only at moving interfaces, such as detachable tooling, or where thermal movement is substantial.

 

 Mobile plant: large excavator

Typical configuration: Use a hybrid system—rigid tube for fixed runs on the undercarriage and frame, and flexible hoses at moving joints such as the boom, stick, bucket, swing, and travel motors.

Why hoses are essential on moving links

  • Repeated articulation: Boom, stick, and bucket joints undergo extensive flexing; hoses can follow this movement without the fatigue that rigid lines would experience.
  • Shock and vibration control: Hoses absorb terrain shocks and hydraulic impulses, protecting valves and limiting crack growth at fittings.
  • Compact routing: Hoses pass through pivots and confined spaces where rigid bends would be impractical.

Why rigid still appears on the frame

  • Durability and protection: Metal gives fixed chassis runs better abrasion resistance and mechanical protection.
  • Stable pressure delivery: Rigid lines from the pump to the main control valve reduce compliance and sharpen response for critical functions.
  • Practical layout pattern
  • Run rigid tube from the hydraulic pump to the main control valve on the rotating platform or frame.
  • Route flexible hoses from the valve outlets to the boom, stick, and bucket cylinders, using clamps and sleeves to prevent abrasion.
  • Install short isolation hoses at pump and motor mounts to limit vibration entering the structure.

Rule of thumb for modern circuits 

Choose rigid pipework for fixed, high-pressure, high-temperature, precision-critical runs designed for long service life.

Choose flexible hoses where components move, vibration is significant, routing is tight or complex, or rapid servicing is important.

For both fixed and mobile equipment, the most reliable approach is to divide the circuit into zones: use metal for stable distribution, hoses at moving interfaces and selected isolation points, and well-controlled transitions between them.