Flexit HT1 and HT2 hoses are designed to transfer high-temperature fluids, including mineral and biological hydraulic oils, polyglycol-based oils, oil-in-water emulsions and water.
Both hoses have a synthetic rubber liner and a blue synthetic rubber cover approved by MSHA for flame resistance.
HT1 is reinforced with one high-tensile steel-wire braid, while HT2 uses two.
Both hose types operate from -40°C to +135°C, with occasional peaks of up to +150°C.
Both hoses can be used with Intertraco one piece fittings, type K and J, and Intertraco two piece fittings type B with either SN03T , S0210, or S0420 ferrules.
| Hose | Size ins | Outside diameter mm | Working pressure bar | Burst pressure bar | Bend radius mm | Weight kg/m |
|---|---|---|---|---|---|---|
| HT1-04 | 1/4 | 11.1 | 225 | 900 | 100 | 0.21 |
| HT1-05 | 5/16 | 12.7 | 215 | 860 | 115 | 0.24 |
| HT1-06 | 3/8 | 15.1 | 180 | 720 | 125 | 0.33 |
| HT1-08 | 1/2 | 18.0 | 160 | 640 | 180 | 0.41 |
| HT1-10 | 5/8 | 21.2 | 130 | 520 | 200 | 0.45 |
| HT1-12 | 3/4 | 25.2 | 105 | 420 | 240 | 0.58 |
| HT1-16 | 1 | 33.1 | 88 | 352 | 300 | 0.88 |
| HT1-20 | 1-1/4 | 40.2 | 63 | 252 | 420 | 1.23 |
| HT1-24 | 1-1/2 | 46.7 | 50 | 200 | 500 | 1.51 |
| HT1-32 | 2 | 60.2 | 40 | 160 | 630 | 1.97 |
| Hose | Size ins | Outside diameter mm | Working pressure bar | Burst pressure bar | Bend radius mm | Weight kg/m |
|---|---|---|---|---|---|---|
| HT2-04 | 1/4 | 15.0 | 400 | 1600 | 100 | 0.33 |
| HT2-05 | 5/16 | 16.4 | 350 | 1400 | 115 | 0.39 |
| HT2-06 | 3/8 | 18.8 | 330 | 1320 | 125 | 0.50 |
| HT2-08 | 1/2 | 22.2 | 275 | 1100 | 180 | 0.59 |
| HT2-10 | 5/8 | 25.2 | 250 | 1000 | 200 | 0.71 |
| HT2-12 | 3/4 | 29.3 | 215 | 860 | 240 | 0.86 |
| HT2-16 | 1 | 37.2 | 165 | 660 | 300 | 1.28 |
| HT2-20 | 1-1/4 | 47.3 | 125 | 500 | 420 | 2.02 |
| HT2-24 | 1-1/2 | 53.7 | 90 | 360 | 500 | 2.23 |
| HT2-32 | 2 | 66.7 | 80 | 320 | 630 | 2.85 |
