Inline check valves

Intertraco inline check valves offer a simple, reliable way to control hydraulic flow. Fitted directly into a hose or pipeline, they let oil flow in one direction and automatically prevent reverse flow. This protects components and helps circuits maintain pressure without electrical or manual control.

Function and benefits

The valve opens when upstream pressure exceeds the cracking pressure and closes if flow reverses or forward pressure drops. This one-way action prevents unwanted pressure transfer, protects pumps from reverse flow, helps preserve accumulator charge and retains oil in a line to reduce unintended actuator movement.

Their compact inline design is easy to add to new or existing pipework, especially where space is limited. When correctly specified for flow, pressure, fluid and cracking pressure, these valves promote safer, more efficient and more reliable hydraulic performance.

Typical applications

  • Pump outlets and multi-pump circuits: Isolate pumps and prevent stored hydraulic energy from flowing back into them.
  • Accumulator circuits: Maintain accumulator pressure and prevent discharge through a stationary pump.
  • Construction and mobile machinery: Support reliable operation in excavators, loaders, lifting equipment and hydraulic tools.
  • Cylinder and actuator circuits: Retain an oil column, support controlled movement and reduce unintended load movement.
  • Bypass and flow-control circuits: Provide free flow in one direction around a restriction, filter or throttle while controlling flow in the other.
  • Load-sensing and pressure-signal lines: Route pressure signals while preventing reverse communication between circuit sections.

The range is shown in the table below.

Part numberBoreMax flowMax pressureLengthAF
l/minbarmmmm
CV-041/4133506019
CV-063/8253507024
CV-081/2403507630
CV-123/4603009236
CV-1619025010845
CV-201-1/416025012755
CV-241-1/221025014265

Leave a Reply

Your email address will not be published. Required fields are marked *