Hose protection on our hose assemblies

To increase safety, reliability and durability of hose assemblies in the toughest working environments hose protection is essential. We stock and supply a range of hose protection products including a range of burst protection and heat and fire protection sleeving.

We regularly finish hose assemblies for our customers with a hose protection product.

Our product range includes the following:

ProductPurposeNumber of productsSize range
Spring guardProtects hose from external damage.60I/D 10-70 mm
PyrojacketProtects hose from heat and flames.13I/D 11-76 mm
PVC spiral guardProtects hose from external damage.7I/D 6-32 mm
Stainless steel sleevingProtects hydraulic hose assemblies from abrasion, heat, and flames.13I/D 12-80 mm
Burst protection sleevingContains oil in the event of a burst hose.8I/D 19-64 mm

Spring guard

Spring guard is a protective metal coil that helps extend the service life of hydraulic hoses by shielding them from external damage. Made from durable, corrosion-resistant material, it supports long-term hose reliability in the most demanding applications.

Key Features:

  • Enhanced Hose Protection: Wraps around hydraulic hoses to guard against crushing and other external damage caused by harsh environments or contact with machinery, significantly extending hose service life.
  • Durable Construction: Made from high-quality materials to withstand heavy impacts, sharp edges and high temperatures while delivering consistent performance.
  • Corrosion Resistance: Retains its strength and integrity in damp or chemically harsh environments.

Available in a wide range of sizes, with internal diameters from 10 mm to 70 mm.

All sizes are supplied in 10-metre coils.

Aerostyle Grade Pyrojacket

Aerostyle Grade Pyrojacket is a protective firesleeve fitted over hydraulic hoses. Its main purpose is to keep the hose functioning longer and more safely in high-heat, flame, molten-splash, abrasive, or otherwise harsh environments.

It uses a glass-fibre sleeve with a silicone coating to:

  • Insulate the hydraulic line from radiant heat, reducing heat transfer into the fluid and hose.

  • Protect the hose from flames and molten metal splash; the coating forms a protective refractory layer when exposed to flame.

  • Improve resistance to abrasion, oil, water, vibration, and mechanical damage.

  • Help protect nearby personnel from burns caused by very hot hoses.

  • Extend hose service life and reduce the risk of heat-related hose failure and downtime.

In short, it is not the hydraulic hose itself—it is a heat- and fire-resistant outer jacket that protects the hose and helps preserve hydraulic-system integrity in hostile operating conditions.

PVC spiral guard

Flame-Retardant, Anti-Static Spiral Guard protects most hydraulic, pneumatic and industrial hose assemblies. Made from PVC, it is lighter than a metal spring guard, reducing strain on the hose.

Designed to protect hoses, reduce costly downtime and improve site safety.

Key characteristics:

  • Protects most hydraulic, pneumatic and industrial hose assemblies.
  • Lightweight construction reduces the weight and strain placed on hydraulic hoses.
  • Flame-retardant and anti-static.

Available in a range of sizes from 6mm to 32mm internal diameter. All sizes are sold in 50 metre lengths.

 

Stainless steel overbraid for hydraulic hoses

Stainless steel overbraid is used to cover hydraulic hose assemblies in a wide range of industrial applications. It provides added protection against abrasion and heat.

It is commonly used on hydraulic hoses that need corrosion resistance, mechanical strength, and long-term durability. Stainless steel overbraid also improves safety and reliability in demanding environments.

Overbraid helps protect against extreme temperatures, abrasion, and fire exposure, adding an extra level of safety, reliability, and durability.

The protective external overbraid is fitted over the hydraulic hose during assembly.

The stainless steel braid is supplied as a flexible woven sleeve in a range of sizes from 15mm to 80mm internal diameter.

 

Burst protection sleeving

The Supply of Machinery (Safety) Regulations 2008 require high-pressure flexible pipes on new machinery to withstand foreseeable stresses and be secured or protected so rupture creates no risk. Residual hazards must be contained by positioning, guards or protective devices, typically burst protection sleeving.

Burst protection sleeving is available in 8 sizes from 19mm to 64mm internal diameter. All sizes are sold in 30 metre lengths.

A suitable burst protection system may use sleeves, shields, clamps, restraints or a combination. Match it to the hose assembly, pressure, temperature, fluid and application.

Key features include:

  • Burst containment: Controls fluid released by a ruptured hose.
  • Pinhole-leak protection: Redirects or limits high-pressure jets before they reach an operator.
  • Directional control: Deflects fluid away from people.
  • Hose restraint: Reduces dangerous movement or whipping after failure.
  • Abrasion resistance: Protects the hose from rubbing against nearby components.
  • Environmental resistance: Options are available for heat, oil, water, dirt and outdoor exposure.
  • Secure fixing: Clamps or restraints keep the protector in place.
  • Inspection access: Allows hose and fitting checks without unnecessary removal.
  • Compatibility: Suits the hose diameter, bend radius, fluid and maximum working pressure.

Reduced downtime

Protection can limit fluid-spray damage, abrasion and hose movement, reducing downtime. The failed hose must still be replaced and the cause investigated.

Lower environmental impact

Containing or redirecting fluid reduces contamination of soil, drains and work areas. Spill controls remain essential near water or sensitive ground.

Selecting and installing protection

Before selection, a competent person should assess:

  1. Maximum working pressure and temperature.
  2. The hydraulic fluid and any chemical compatibility issues.
  3. The hose diameter, length, movement and bend radius.
  4. The distance and line of sight between the hose and people.
  5. The consequences of losing hydraulic pressure.
  6. Exposure to abrasion, heat, impact, crushing and contamination.
  7. Whether the machine manufacturer specifies a particular guard or shield.
  8. Whether the protector has suitable test evidence and installation instructions.

The protector should be installed so it cannot slide away from the hazard area, interfere with moving parts or prevent essential inspection. Hose routing, clamps, fittings and attachment points should be checked at installation and during scheduled inspections.

Inspection and maintenance

A hose protector does not remove the need for routine inspection. Checks should look for:

  • Abrasion, cuts, blistering or exposed reinforcement.
  • Kinks, excessive bending or crushing.
  • Loose, damaged or missing clamps.
  • Leaks, oil staining or evidence of pinhole spray.
  • Damaged fittings or coupling movement.
  • Heat damage or chemical deterioration.
  • Incorrect routing or contact with moving components.
  • Any protector displacement or deterioration.

Never search for a hydraulic leak with bare hands. HSE advises that injection injuries require immediate professional medical treatment, even when the wound appears small.

 

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *